Charging - which charger to use?

iRex Support iRex Home Shop MyiRex

Support Center » Knowledgebase » Charging - which charger to use?

	Charging - which charger to use?

Solution Any USB compliant charger can be used.

DR will consume maximal up-to 500mA @ 5 Volts.
It does not matter if the charger can supply more than 500mA, less may not give satisfactory results in charging duration.
A wall charger output voltage must be between 4.75 V and 5.25 Volt i.e be according USB specification.

Are you not sure ?
Find a validated USB type wall charger for all regions in our web shop at

NOTE:
====
Many vendors sell USB chargers that have an output voltage higher than the USB spec defines i.e. 5.25 Volt.
Though Digital Reader 1000 can withstand slighter higher input voltages these chargers are better not used to charge a Digital Reader 1000.
Using a non USB compliant wall charger may permanently damage your DR1000!

************************************************************
** Chargers with an output voltage of 5 .. 5.7 (max) Volt can be used **
************************************************************

WARNING:
=======
The iLiad travel hub and power supply **CAN NOT** be used to charge DR 1000 series devices.
Using the iliad travel hub and iLiad wall charger will permanently damage your DR1000!

Article Details

Article ID:

Created On:

22 Oct 2008 11:43